Light & Medium Duty Feeders

Model A Feeders

The smallest feeder in the line, this economical model will give precise feeding of the most minute amounts of materials. It is ideal for feeding a regulated amount of granular to small lump material from a hopper to a second process, in small packaging operations or laboratory use.

These feeders control material flow from a few pounds per minute to 2 tons per hour.

Model C Feeders

Larger than Model A Feeders, these units use the same drive that provides the best linearity in the industry. Special construction is also available for Class II, Group F and G installation.

Model HS Feeders

Eriez AC operated Hi-Speed Feeders have been designed for exceptionally high speed feeding of light, bulky materials. They provide greater economy and efficiency in feeding, filling, etc., and are ideal for use in conjunction with many weigh scale and packaging machines.

These feeders operate at speeds up to 75% greater than standard models; however, they do follow many of the basic tried and proven mechanical design and construction features of other Hi–Vi Feeders.

Model HD Feeders

“High Deflection” Vibratory Feeders combine the higher deflection 3/16- inch (4.8 mm) and lower frequency (30 cps) advantages of a mechanical feeder with the trouble–free service of an electromagnetic feeder. The Model HD is designed to handle powders and leafy products that normally could not be fed successfully in an electromagnetic feeder. Feed rates of up to 80 feet per minute (24 m/min) are possible for products with a bulk density less than 10 lb/ft3 (.16 gm/cc).